Now that you have bought a new TV, how are you going to hang it on the wall? Before you immerse yourself in watching your favorite movies and programs, you need to find a suitable place to install TV. But there’s a small problem – you don’t have any studs for the TV bracket, or your landlord doesn’t allow drilling.

There’s no need to panic. Let’s learn how to install a TV on the wall without using studs.

Installing a TV without studs can be tricky. Although the drywall can support up to 100 pounds of TV, which is still fragile, and the bracket  need additional support, otherwise the TV may fall to the ground. Wall studs make up the frame for the TV that supports your walls. They provide a strong anchor point to ensure that the bracket and TV remain in place. The good news is that although the walls are hollow, the stud free TV bracket can still work. Here’s how to install the TV on the wall without studs:

Anchor

Anchoring is one of the easiest ways to hang a TV on the wall without studs. They help prevent screws from falling out of holes in the wall or damaging the wall. It provides a safe installation for flat panel TVs. Just drill a hole accordingly, insert the sleeve, and finally slide into the anchor. You can even pull it close to the wall with a disposable pull tool.This will hold the anchor in place so that it will not loosen when inserting the screw.

Toggle the anchor bolt

Toggle anchors or toggle bolts are a good way to hang a TV without studs. You need to use a hollow wall anchor that looks like an ordinary screw with a butterfly toggle at the end. Once you put them on the wall, they will be pasted on the back. Pulling the screw or applying some pressure has little effect because the toggle rod pulls the entire wall, not just the center. These have proven to be very powerful themselves when it comes to installing a TV without studs, but as a general rule, it should not be paired with a full-motion bracket. If you carefully consider the limitations of walls and toggles, hanging a TV without studs may be a very safe and reliable solution. Many people have tried this solution with no problems.

The toggle anchors / toggle bolts look like an ordinary screw, But they have a butterfly toggle at the end. When you place them in a wall, toggle anchors work by attaching to the back of the drywall. Pulling the screw or applying some external force has little effect, as the toggle cause the whole sheet of drywall to respond, rather than just the crumbly center. This means that this is the difference between pulling the entire wall and removing a single screw.

Consider a mounting plate

A mounting plate is a good choice when it comes to installation without studs. Mounting plates are usually made of metal, but can also be made of plywood. This helps the anchor to carry the weight of the TV more easily and provides the opportunity to add more anchors to make it a safer bracket.

Although the mounting plate looks unsightly, you can still consider a mounting plate that is smaller than the TV. Choose one in color and style, which matches well with the appearance of your room, or the paint. The choice is entirely up to you.

Install the TV from the ceiling

This may not be the most common option, but if you install the TV without studs, installing the TV from the ceiling is another option. The installation may be more technical than you want, and it is not always feasible, but almost all ceilings have beams or joists, which have the same function as studs. Depending on the height of the ceiling and the weight of the TV, you may need longer screws to fix the joist. These screws may be more scattered than you think, but they should be there.

Share This Post!

Related articles